Admin Tools
Password policy checker
Compare your domain’s password and account lockout settings with five published standards — the CIS Benchmark, PCI DSS, NIST SP 800-63B, DISA’s STIG and the Five Eyes guide — setting by setting, each value with the section it comes from.
Your policy
Filled in: a new domain’s Default Domain Policy. Type your values, or paste what PowerShell or net accounts prints.
Fill in from PowerShell or net accounts
The output of Get-ADDefaultDomainPasswordPolicy or Get-ADFineGrainedPasswordPolicy -Filter * in any language, or of net accounts /domain in English. Only the nine settings are read.
NIST’s minimum length and PCI DSS’s 90 days depend on it.
Level 1, for domain controllers and member servers. The benchmark applies these settings through the Default Domain Policy, and lists two more for member servers only: Relax minimum password length limits (1.1.6) and Allow Administrator account lockout (1.2.3).
| Setting | Your domain | Requirement | Result |
|---|---|---|---|
| Password Policy | |||
| characters | 14 or more charactersCIS 1.1.4 | — | |
| passwords remembered | 24 or more passwordsCIS 1.1.1 | — | |
| days; 0 = never expires | 365 days or fewer, not 0CIS 1.1.2 | — | |
| days | 1 day or moreCIS 1.1.3 | — | |
| EnabledCIS 1.1.5 | — | ||
| DisabledCIS 1.1.7 | — | ||
| Account Lockout Policy | |||
| failed sign-ins; 0 = never locks | 5 or fewer, not 0CIS 1.2.2 | — | |
| minutes; 0 = until an administrator unlocks it | 15 minutes or moreCIS 1.2.1 | — | |
| minutes | 15 minutes or moreCIS 1.2.4 | — | |
A comparison of nine settings with the values each standard publishes, in the versions listed under The standards side by side: not an assessment. Each standard asks for more than a password policy.
What you type stays in your browser: nothing is sent anywhere.
The standards side by side
Each standard’s value for the nine settings, with the section it comes from, beside the Windows default. The marks follow the values in the checker above.
| Setting | Windows default | CIS Benchmark | PCI DSS | NIST SP 800-63B | DISA STIG | Five Eyes guide |
|---|---|---|---|---|---|---|
| Minimum password length | 7 characters | 14 or more characters1.1.4 | 12 or more characters8.3.6 | 15 or more with a password alone; 8 or more with MFA3.1.1.2 | Not set; application accounts: 15 or more (V-277989) | 15 or more; four random words for a password used alonePassword spraying; DCSync |
| Enforce password history | 24 passwords | 24 or more passwords1.1.1 | 4 or more: not one of the last four8.3.7 | Not set | 24 passwordsV-278036 | Not set |
| Maximum password age | 42 days | 365 days or fewer, not 01.1.2 | 90 days or fewer, or dynamic risk analysis; not with MFA8.3.9 | 0: no periodic change3.1.1.2 | 180 days or fewer, not 0V-278037 | Not set |
| Minimum password age | 1 day | 1 day or more1.1.3 | Not set | Not set | 1 day or moreV-278038 | Not set |
| Password must meet complexity requirements | Enabled | Enabled1.1.5 | Letters and numbers8.3.6 | Disabled: no composition rules3.1.1.2 | EnabledV-278039 | Not set |
| Store passwords using reversible encryption | Disabled | Disabled1.1.7 | Disabled: stored passwords unreadable8.3.2 | Disabled: stored salted and hashed3.1.1.2 | DisabledV-278040 | Not set |
| Account lockout threshold | 0: never locks | 5 or fewer, not 01.2.2 | 10 or fewer, not 08.3.4 | 100 or fewer, not 03.2.2 | 3 or fewer, not 0V-278034 | 5 or fewer, not 0; break-glass accounts exceptedPassword spraying |
| Account lockout duration | Not defined | 15 minutes or more1.2.1 | 30 minutes or more, or until the identity is confirmed8.3.4 | Not set | 15 minutes or more, or 0V-278033 | Not set |
| Reset account lockout counter after | Not defined | 15 minutes or more1.2.4 | Not set | Not set | 15 minutes or moreV-278035 | Not set |
Sources: CIS Microsoft Windows Server 2025 Benchmark v2.1.1 (November 3, 2026), sections 1.1 and 1.2, Level 1 · PCI DSS v4.0.1: Requirements and Testing Procedures (June 2024), requirement 8.3 · NIST SP 800-63B-4, Digital Identity Guidelines: Authentication and Authenticator Management (2025), sections 3.1.1.2 and 3.2.2 · Microsoft Windows Server 2025 STIG, Version 1, Release 4 (September 30, 2026), WN25-AC-000010 to WN25-AC-000090 · Detecting and mitigating Active Directory compromises (September 26, 2024, updated September 15, 2026), Mitigating password spraying; Mitigating DCSync · Windows defaults: Microsoft Learn, each setting’s default in the Password Policy and Account Lockout Policy pages. CIS and PCI DSS publish their documents after a sign-up or a license agreement; DISA’s STIG is in its library under “Windows Server 2025”.
What the settings do not show
- Fine-grained policies win for their members. A user that a fine-grained password policy applies to gets its settings instead of the domain’s. Paste the output of
Get-ADFineGrainedPasswordPolicy -Filter *above to check each one. CIS adds that the domain’s settings reach domain accounts only through the Default Domain Policy; set in another GPO, they affect local accounts only. - More than 14 characters. The domain’s policy goes up to 14 unless Relax minimum password length limits is enabled: then up to 128, enforced by domain controllers from Windows Server, version 2004 — Windows Server 2022 and later. Microsoft warns that a length above 14 may affect older clients and applications, and recommends turning on Minimum password length audit first. A fine-grained policy is the other way.
- Complexity is not “letters and numbers”. Windows complexity asks for three of five kinds of character — upper case, lower case, digits, special characters, other letters — and no account name in the password. A password with no digit can pass it, so it does not by itself give PCI DSS 8.3.6’s letters and numbers. NIST asks for no composition rules at all.
- NIST’s blocklist is not a policy setting. NIST asks that every new password be compared with a list of common, expected and compromised passwords (3.1.1.2). The domain’s policy has no such setting; on premises, Microsoft Entra Password Protection checks password changes and resets on the domain controllers against its banned-password lists.
- MFA changes two answers: NIST’s minimum length, 15 characters for a password used alone and 8 with MFA, and PCI DSS 8.3.9’s 90 days, which does not apply where MFA is used — or where the security posture of accounts is analysed dynamically instead.
- Expiry divides the standards. CIS (365 days), DISA’s STIG (180) and PCI DSS (90, for a password used alone) set a maximum password age; NIST asks for none, and Microsoft’s recommended security baseline does not contain the password-expiration policy.
- Lockout duration and reset. While lockout is on, Windows requires the reset time to be no longer than the lockout duration. A duration of 0 keeps an account locked until an administrator unlocks it: DISA’s STIG accepts it, PCI DSS accepts locking until the identity is confirmed, and CIS’s value is 15 minutes or more.
- The domain’s built-in Administrator is never locked out, whatever the threshold. The Five Eyes guide asks for 30 characters or more for it, for service accounts and for break-glass accounts.
- Versions change. Values move between versions — DISA’s STIG moved its maximum password age to 180 days in 2026. Check the version you are assessed against.
Sources: Microsoft Learn, Password must meet complexity requirements · Maximum password age · Reset account lockout counter after · Microsoft Entra Password Protection; Microsoft Support, Minimum Password Length auditing and enforcement on certain versions of Windows (KB4557232); the standards listed above.
Where to find your values
- Group Policy: the GPO linked to the domain, by default the Default Domain Policy — Computer Configuration, Policies, Windows Settings, Security Settings, Account Policies, then Password Policy and Account Lockout Policy.
- Fine-grained policies: Active Directory Administrative Center, System, Password Settings Container.
- net accounts /domain prints seven of the nine: not complexity or reversible encryption.
- PowerShell, with the Active Directory module — paste the first two into the checker:
Get-ADDefaultDomainPasswordPolicyThe domain’s own settings.
Get-ADFineGrainedPasswordPolicy -Filter *Every fine-grained policy, with its precedence and the users and groups it applies to.
Get-ADUserResultantPasswordPolicy -Identity jsmithThe fine-grained policy that wins for one user, when several apply (replace jsmith).
Sources: Microsoft Learn, Get-ADDefaultDomainPasswordPolicy · Get-ADFineGrainedPasswordPolicy · Get-ADUserResultantPasswordPolicy
In AD Reports
The checker reads one policy at a time. These reports list the domain’s policy and every fine-grained policy, and three security findings flag the weak ones:
- Default Domain Policy: Password Policies (FGPP)The domain’s own password and lockout settings: what applies to every user no fine-grained policy covers.
- All Password Policies: Password Policies (FGPP)Every fine-grained policy with its settings, its precedence and the users and groups it applies to.
- Policy Assignments: Password Policies (FGPP)Which users and groups each fine-grained policy applies to.
- Minimum Password Length Below 15 Characters: Security FindingsThe domain’s policy and each fine-grained policy that applies to someone, when they allow passwords shorter than 15 characters.
- Account Lockout Off or Above Five Failed Attempts: Security FindingsPolicies that never lock an account out, or allow more than five failed sign-ins first.
- Reversible Encryption Set by Password Policy: Security FindingsPolicies that store every password they cover with reversible encryption.
- Password Never Expires: Password StatusAccounts exempt from password expiry, whatever the maximum password age.
Check every password policy in your domain
Download the free 14-day trial: the Password Policies reports list the domain’s policy and every fine-grained one, and three Security Findings flag short passwords, weak lockout and reversible encryption.