Admin Tools

userAccountControl decoder

See which flags a userAccountControl value holds, tick flags to build a value, and get the LDAP filter that finds the accounts — with Microsoft’s flag table and the flags that are not what they seem.

Value to flags

Decimal, such as 514, or hexadecimal with 0x, such as 0x202.

Decimal
—
Hexadecimal
—
  • Enter a value, pick a common one, or tick flags below.
Flags to value

Tick flags and the value above adds them up.

LDAP filter for the ticked flags

—

Tick one or more flags to build a filter.

Rule 803 matches when every bit of the value is set, 804 when any is; the value is always written in decimal. More in the LDAP filter syntax.

What you type stays in your browser: nothing is sent anywhere.

The flags

A userAccountControl value is the sum of its flags: 514 is ACCOUNTDISABLE (2) plus NORMAL_ACCOUNT (512), Microsoft’s own example of a disabled user. The Account options check boxes in Active Directory Users and Computers set some of them; some only the directory service can set or reset.

FlagHexDecimalMeaningAD Reports lists them in
SCRIPT 0x0001 1 The logon script runs.Microsoft’s protocol specification [MS-ADTS] lists this bit as unused in Active Directory. —
ACCOUNTDISABLE 0x0002 2 The account is disabled.
HOMEDIR_REQUIRED 0x0008 8 A home folder is required.
LOCKOUT 0x0010 16 The account is locked out.Since Windows Server 2003 this state is kept in msDS-User-Account-Control-Computed, not in userAccountControl.
PASSWD_NOTREQD 0x0020 32 No password is required: the password-length policy does not apply to the account.
PASSWD_CANT_CHANGE 0x0040 64 The user cannot change the password.Not assigned through this attribute: it is a permission on the user object. —
ENCRYPTED_TEXT_PWD_ALLOWED 0x0080 128 The password is stored with reversible encryption.
TEMP_DUPLICATE_ACCOUNT 0x0100 256 An account for a user whose primary account is in another domain: access to this domain, not to domains that trust it.Microsoft’s protocol specification [MS-ADTS] lists this bit as unused in Active Directory. —
NORMAL_ACCOUNT 0x0200 512 The default account type: a typical user. —
INTERDOMAIN_TRUST_ACCOUNT 0x0800 2048 An account for a domain-to-domain trust.Trust accounts carry PASSWD_NOTREQD too: Microsoft’s default for a trust is 2080.
WORKSTATION_TRUST_ACCOUNT 0x1000 4096 A computer account for a computer that is a member of this domain: workstations, member servers, and read-only domain controllers.
SERVER_TRUST_ACCOUNT 0x2000 8192 A computer account for a domain controller; read-only domain controllers have WORKSTATION_TRUST_ACCOUNT instead.A domain controller’s default is 532480: this flag and TRUSTED_FOR_DELEGATION.
DONT_EXPIRE_PASSWORD 0x10000 65536 The password never expires.
MNS_LOGON_ACCOUNT 0x20000 131072 An MNS logon account.Microsoft’s protocol specification [MS-ADTS] lists this bit as unused in Active Directory.
SMARTCARD_REQUIRED 0x40000 262144 The user must log on with a smart card.
TRUSTED_FOR_DELEGATION 0x80000 524288 The account a service runs as is trusted for Kerberos delegation: the service can impersonate any client that uses it.
NOT_DELEGATED 0x100000 1048576 The user’s security context is never delegated to a service, even one trusted for delegation.
USE_DES_KEY_ONLY 0x200000 2097152 Kerberos: only DES encryption types are used for the account’s keys.
DONT_REQ_PREAUTH 0x400000 4194304 Kerberos pre-authentication is not required to log on.
PASSWORD_EXPIRED 0x800000 8388608 The password has expired: worked out by the system from pwdLastSet and the domain’s password policy.Since Windows Server 2003 this state is kept in msDS-User-Account-Control-Computed, not in userAccountControl.
TRUSTED_TO_AUTH_FOR_DELEGATION 0x1000000 16777216 Enabled for delegation: a service running as the account can take on a client’s identity and authenticate as that user to other servers. Security-sensitive.
NO_AUTH_DATA_REQUIRED 0x2000000 33554432 Kerberos: service tickets for the account are issued without a PAC (Privilege Attribute Certificate).From [MS-ADTS]; not in Microsoft’s KB flag table. —
PARTIAL_SECRETS_ACCOUNT 0x4000000 67108864 A read-only domain controller (RODC). Removing it from an RODC compromises that server’s security.Set together with WORKSTATION_TRUST_ACCOUNT. —

Sources, Microsoft Learn: UserAccountControl property flags (KB 305144) · User-Account-Control attribute · [MS-ADTS] 2.2.16 userAccountControl Bits · [MS-ADTS] 6.1.1.3.2 Read-Only Domain Controller Object · ms-DS-User-Encrypted-Text-Password-Allowed (reversible encryption). The reports column links this site’s Report Library.

Flags that are not what they seem

  • LOCKOUT (16) and PASSWORD_EXPIRED (8388608). In domains since Windows Server 2003, Microsoft moved these two states to msDS-User-Account-Control-Computed, an attribute whose value includes bits that are worked out when it is read rather than stored. A userAccountControl filter on them will not reliably find locked-out or expired accounts; for lockouts, use lockoutTime (see the LDAP filter examples).
  • PASSWD_CANT_CHANGE (64). You cannot assign it by changing userAccountControl: “user cannot change password” is a permission on the user object — the Change Password right denied to Everyone and to SELF.
  • Set by the directory. Microsoft notes that some values cannot be set on a user or computer object at all: only the directory service sets or resets them.
  • SCRIPT, TEMP_DUPLICATE_ACCOUNT and MNS_LOGON_ACCOUNT. Microsoft’s KB table lists them; its protocol specification [MS-ADTS] marks these three bits as unused in Active Directory: they must be zero and are ignored.
  • NO_AUTH_DATA_REQUIRED (33554432) is defined in [MS-ADTS] but not in the KB table.
  • Defaults. Microsoft gives these: a typical user 512 (0x200), a workstation or member server 4096 (0x1000), a domain controller 532480 (0x82000), a trust 2080 (0x820). Trust accounts carry PASSWD_NOTREQD because trusts do not use the usual password policy.
  • Decimal in filters. After := the value must be a decimal number — not hexadecimal such as 0x202, and not a name such as ACCOUNTDISABLE. The builder above always writes decimal.
  • Other bits. A value with a bit that is no flag above — 0x4, 0x400, 0x4000, 0x8000 or anything from 0x8000000 up — is shown as “Not a flag”. Microsoft lists 0x8000000 (UF_USE_AES_KEYS) among the bits of msDS-User-Account-Control-Computed.

Sources, Microsoft Learn: UserAccountControl property flags (KB 305144) · ms-DS-User-Account-Control-Computed attribute · Reading User Cannot Change Password (LDAP Provider) · [MS-ADTS] 2.2.16 userAccountControl Bits · Search Filter Syntax

In AD Reports

The decoder reads one value. These reports list every account in the domain by the same flags — the table above links one for each flag that has one:

Find these accounts in your domain

Download the free 14-day trial: the Account Status and Password Status reports list disabled, locked, never-expiring and delegation-enabled accounts.